4mm Antique Mirror T1 As-Cut
Maximum size for this product is 2400mm length x 1200mm width / 2.m sq overall (If you require a larger size to this we recommend opting for our 6mm Polished Antique Mirror https://glassonline.ie/product/6mm-antique-mirror-t1-with-polished-edges/)
If you require off standard sizes please contact the office on 044-9343455 or email email@example.com
Leadtime 5-7 working days
4mm Antique Mirror. Ideal for bathrooms, hallways, display cases among many other uses.
For use where the edges of the mirror are concealed with a sealant or a timber, aluminium or PVC fixing slip. Sharp edges are removed only, but edges are NOT polished. YOU SHOULD NOT SELECT THIS PRODUCT IF THE EDGES OF THE MIRROR WILL BE VISABLE AND NOT COVERED BY A FIXING SLIP OF ATLEAST 3MM IN WIDTH.
There are many different versions of antique mirror on the market. Please satisfy yourself with the colour of our product. Small samples can be posted out to you at a cost of €15 if you require. Click here; https://glassonline.ie/product/antique-mirror-t1-sample-only/
Lead time 7-10 working days ex delivery.
Available with and without safety backing.
Safety backing is an adhesive film applied to the reverse side of the mirror to minimise the risk of injury in the event of breakage. If the mirror were to break, the majority of pieces should stay together, rather than falling down in dangerous sections. Note – safety backed mirrors should be fitted using clips, screws, or held in place with slips, gasket or trim. It is not recommended to stick a safety backed mirror with adhesive as most adhesives on the market will not adhere to the safety backing correctly. See our accessory section for suitable clips and trims. Contact us with details of your project if you need further advice.
Additional charges for shaping, drilling and notching , please email sketch or call 044-9343455 for prices.
Minimum charge €30.
Prices include VAT @23%.
Lakeland Interiors accept no liability for correct product selection, application or usage.